Hunter Select
Free shipping on Hunter Select arrows
within the continental USA only

Welcome to Rose City Archery, Inc.

On sale for $68.26
regular $75.24
(10% discount does not apply to FET)

Your Port Orford Cedar Arrow Manufacturer!

International
Customer
Customer Service
541-572-6408
Monday - Friday 8:30 to 4:30
Pacific Time

Order by Phone
Toll-free
1-866-POC-ARROW
1-866-762-2776

Finished Arrows
Signature Series
Elite Extreme
Hunter Elite
Hunter Premium
Hunter Select
Spine Test Kits
Unspined Kid Arrows

Shafts
LCN shafts
(lacquered, crested, nocked)
Port Orford Cedar Shafts
(Bare or Clear lacquered)
Unspined kid Shafts

Arrow Building
Starter Assembly Kits
Kiddie Kits
Finishing Color Kit
Lacquers
Finishing Tools
Feathers
Fletching Jigs
Nocks
Points & Broadheads
Arrow Glue
Taper Tools

Other Products
Quivers
Bow Accessories
Kids Bows
Rose of Cedar™
Bugg Off Spray
(Scent Eliminator
& insect repellent)
Bugg Off Candle
Cedar Pet Care
Cedar Cleaners

Refinement Process
Logs to Arrows
Arrow Finishing

General
History
Distributors
Return Policy
Contact us!

Port Orford Cedar wood arrows in a variety of color combinations, Extreme Elite design, from
Rose City Archery, Inc.

HUNTER SELECT
Colored lacquer. Crested. Shield Feathers. Classic Bohning Nocks. Full length Port Orford Cedar wood shafting. option of Points or Broadheads installed. Color combinations vary, and are subject to stock on hand, arrows will be matched per dozen.

Hunter cedar wood arrows

images shown are a representation only, Color combinations vary, and are subject to stock on hand, arrows will be matched per dozen.)

Select cedar wood arrows

$75.24 per Dozen
$68.26

Installation Options

View Options

Steel Field Points 125 grain $85.16 dz.
Zwickey Eskimo Broadheads $126.16
Grizzly Broadheads $128.16
Judo Points $133.96
Points or Broadhead installation is an additional $12 per dozen plus cost of Points or Broadheads. Available in shopping cart.
(requires draw length)
(federal excise tax included in price)
Please choose diameter and spine weight below

Hunter Select Order Here

Correct Draw Length

How to measure

If you would like points installed you must choose the type of points and your correct draw length in the shopping cart. If your exact draw length is not listed please use the comment section to give us an accurate draw length.

RCA is not responsible for incorrect measurements, varying or incompatible measuring techniques, if you are not absolutely sure of how your draw length was measured you will need to re-measure it yourself. All draw lengths will be measured by RCA from the deepest part of the throat of the nock to the BOP (back of point). You must use this same technique to measure your draw length for accuracy when ordering arrows with points from us. RCA automatically adds correct length to the measurement you give us for tapering purposes for nocks and points.

Broad-heads will be aligned with the throat of the nock and string (90 degrees to the grain), vertical on the shaft.

How to measure your draw length